
On this page
This list orders the most expensive Talon Knife skins in CS2 by the price of the Factory New copies listed for trade on SkinsMonkey, checked on November 16, 2026. Out of all Talon Knife skins, the most expensive Talon you could trade for that day was the Talon Knife | Case Hardened, with one Factory New copy at $1,326.62. The item pages give higher reference prices for some finishes, up to $5,008.56 for the Doppler Black Pearl, but no copy of those was listed, so we cover them in separate sections. All prices are for normal copies, without StatTrak.
Places two to five go to the four Doppler phases, all between $1,091.78 and $1,204.44 in Factory New. The gems and the clean camo finishes sit higher only on paper. A Factory New Forest DDPAT has a reference price of $4,567.00 and a Crimson Web $4,117.28, more than a Doppler Ruby, yet none of them had a Factory New copy for sale. Below we explain why a clean camo Talon costs more than most gems, how close the four Doppler phases are to each other, and where the pattern matters more than the wear. If you want to trade your skins for one of these knives, SkinsMonkey has instant trades with bots.
How We Ranked the Most Expensive Talon Knife Skins
The ranking orders the Talon Knife items that had at least one Factory New copy listed for trade on SkinsMonkey on November 16, 2026, by the price of the cheapest listed copy. A price you can trade for tells you more than a price on paper, and for seven of the ten Talons with the highest item page prices no Factory New copy was listed that day. We still give those reference prices from the item pages, in a separate table and in the sections on gems and camo finishes. The four Doppler phases and the three Doppler gems each have their own item page, so each of them is a separate entry. The general Doppler page without a phase is not counted. All prices change with the market. The “From today” price in the widgets can be lower than the prices in the text, because it also counts Market offers on SkinsMonkey.
The Talon Knife came out in August 2018 with the Horizon Case. Valve describes it as an ivory-handled karambit with brass rivets and saw-tooth ridges. It has 18 finishes plus the vanilla knife: the original finishes such as Forest DDPAT, Crimson Web, Case Hardened and Fade from the Horizon Case and the Danger Zone Case, and the Chroma finishes such as Doppler, Marble Fade and Ultraviolet from the Prisma Case and the Prisma 2 Case. Unlike the M9 Bayonet or the Karambit, the Talon has no Gamma Doppler, so there is no Emerald. Every Talon is Covert, knives cannot take stickers, and SkinsMonkey does not yet show reliable StatTrak prices for knives, so this list covers normal copies only.
Our video below shows the Talon with its normal and rare animations and then every finish and every Doppler phase in game, so you can see what each of these knives looks like before you look at the prices.
- ★ Talon Knife | Case Hardened
One copy at $1,326.62. Check the blue on the blade.
$329.44 – $1,326.45Check price - ★ Talon Knife | Doppler Phase 2
One copy at $1,204.44, the pink and purple phase.
$841.17 – $1,204.01Check price - ★ Talon Knife | Doppler Phase 4
Six copies from $1,196.39, the blue phase.
$763.78 – $1,196.08Check price - ★ Talon Knife | Doppler Phase 3
One copy at $1,093.84.
$756.24 – $1,094.96Check price - ★ Talon Knife | Doppler Phase 1
Six copies from $1,091.78.
$697.36 – $1,092.07Check price - ★ Talon Knife | Fade
Four copies from $1,015.20.
$757.45 – $1,014.12Check price - ★ Talon Knife | Slaughter
Two copies at $869.99, red with darker swirls.
$462.74 – $869.73Check price - ★ Talon Knife | Marble Fade
20 copies from $712.09, the easiest to find.
$489.72 – $711.52Check price
The Factory New Slaughter and Marble Fade close the list, and below $712.09 the Factory New copies are cheaper finishes like Tiger Tooth. Listed copies change through the day, so open the item page before you plan a trade.
The table below lists the ten highest reference prices from the item pages. Only the Case Hardened, Doppler Phase 2 and Doppler Phase 4 among them had a Factory New copy listed for trade.
| Item | Item page price, Factory New, Nov 16 | Price | |
|---|---|---|---|
| 1. FN $5,008.56, no copy listed | $3,454.52up to $3,907.04 | Check | |
| 2. FN $4,567.00, no copy listed | $176.05up to $315.40 | Check | |
| 3. FN $4,117.28, no copy listed | $282.50up to $681.07 | Check | |
| 4. FN $3,472.68, no copy listed | $2,564.33 | Check | |
| 5. FN $2,074.00, no copy listed | $1,543.04 | Check | |
| 6. FN $1,479.56, no copy listed | $224.13up to $476.74 | Check | |
| 7. FN $1,326.62, one copy listed | $329.44up to $1,326.45 | Check | |
| 8. FN $1,268.48, no copy listed | $197.55up to $883.70 | Check | |
| 9. FN $1,204.93, one copy listed | $841.17up to $1,204.01 | Check | |
| 10. FN $1,196.73, six copies listed | $763.78up to $1,196.08 | Check |
Case Hardened, Fade and Marble Fade: Where the Pattern Sets the Price
Three Talon finishes are priced by pattern more than by wear. The prices on their item pages are for ordinary copies. Copies with the most wanted patterns are sold one by one at their own prices, so we cannot give one reliable number for them. Case Hardened tops our list of Talons listed for trade, Fade is sixth and Marble Fade eighth.
Talon Knife | Case Hardened
- Wear in the ranking
- Factory New
- Price on Nov 16
- $1,326.62
- From today
- $329.44
A metal finish with gold, blue and grey patches, and the most expensive Talon listed for trade on November 16. The pattern decides how much of the blade is blue. Its float range goes from 0.00 to 1.00, and ordinary copies cost $1,326.62 in Factory New, $688.17 in Minimal Wear and $504.73 in Battle-Scarred. On November 16, 2026 SkinsMonkey listed one Factory New copy for trade, and it was the only listed Factory New copy among the seven highest reference prices. Copies with a mostly blue blade sell for far more than the item page price, and our guide to Case Hardened skins explains why.
- Talon Knife | Fade, $1,015.20 in Factory New and $1,014.17 in Minimal Wear, from the Horizon Case and the Danger Zone Case. A gradient from yellow to pink and purple along the blade. The more of the blade the pink and purple cover, the higher the fade percentage, and copies with a high percentage cost more than the price here. Four Factory New copies were listed.
- Talon Knife | Marble Fade, $712.09 in Factory New and $691.62 in Minimal Wear, from the Prisma cases. Red, yellow and blue swirls. Copies with only red and blue on the blade are the most wanted pattern. With 20 Factory New copies listed, it was the easiest of the three to find.
| Item | Price for ordinary copies on Nov 16 | Price | |
|---|---|---|---|
| FN $1,326.62, blue blades cost much more | $329.44up to $1,326.45 | Check | |
| FN $1,015.20, high fade percentages cost more | $757.45up to $1,014.12 | Check | |
| FN $712.09, red and blue copies cost more | $489.72up to $711.52 | Check |
Doppler Phases: Four Prices Within $115
Right after the Case Hardened come the four normal Doppler phases. A phase is a colour version of the same finish, and like a gem, which we cover below, it comes from the pattern. In Factory New they cost between $1,091.78 and $1,204.93 on November 16, 2026, so the most expensive phase costs only $113.15 more than the cheapest. Phase 2, Phase 4, Phase 3 and Phase 1 take places two to five on our list of Talons listed for trade. Our guide to CS2 Doppler phases shows what each phase and gem looks like.
Talon Knife | Doppler Phase 2
- Wear in the ranking
- Factory New
- Price on Nov 16
- $1,204.93
- From today
- $841.17
The most expensive normal phase on the Talon and second on our list. Phase 2 shows the most pink and purple of the four phases, and copies with more pink on the blade cost more than the item page price. It drops from the Prisma Case and the Prisma 2 Case. Factory New costs $1,204.93 and Minimal Wear $1,170.29. On November 16, 2026 SkinsMonkey listed one Factory New copy for trade, at $1,204.44, and no Minimal Wear copy.
Doppler Phase 4, the blue phase, costs $1,196.73, and six Factory New copies were listed. Phase 3 and Phase 1 cost within $3 of each other, at $1,093.84 and $1,091.78. Phase 3 had one Factory New copy listed and Phase 1 had six. On every phase Minimal Wear costs about $31 to $35 less than Factory New, and no Minimal Wear phase was listed that day. If you want a Talon for much less, our list of the cheapest Talon Knife skins covers the finishes with the lowest prices.
| Item | Factory New on Nov 16 | Price | |
|---|---|---|---|
| FN $1,204.93, one copy listed | $841.17up to $1,204.01 | Check | |
| FN $1,196.73, six copies listed | $763.78up to $1,196.08 | Check | |
| FN $1,093.84, one copy listed | $756.24up to $1,094.96 | Check | |
| FN $1,091.78, the cheapest phase | $697.36up to $1,092.07 | Check |
The Doppler Gems: The Highest Reference Prices
Gems are rare patterns of the Doppler finish. The game sets the colour from the pattern, so you cannot craft or choose a gem, and each gem has its own item page. On the Talon there are three of them, Black Pearl, Ruby and Sapphire, and all three drop from the Prisma Case and the Prisma 2 Case. On November 16, 2026 SkinsMonkey had no gem Talon listed in any wear, so all three prices below are reference prices from the item pages. The same gems cost much more on bigger knives. On November 5, 2026 the M9 Bayonet Black Pearl cost $10,980.03, and our list of the most expensive M9 Bayonet skins has the details.
Talon Knife | Doppler Black Pearl
- Wear in the ranking
- Factory New
- Price on Nov 16
- $5,008.56
- From today
- $3,454.52
The highest reference price of any Talon Knife on SkinsMonkey. A dark Doppler with a purple and blue sheen on an almost black base. The Talon inspect turns the whole knife around your finger, so the colour shows on both sides of the curved blade. The item page gives $5,008.56 for Factory New and no price for Minimal Wear, and no copy was listed on November 16, 2026. With no copy for sale, the next Black Pearl can cost more or less than this price.
- Talon Knife | Doppler Ruby, $3,472.68 in Factory New and $3,469.18 in Minimal Wear. A solid red Doppler. The two wears differ by $3.50, because the Doppler float range only goes from 0.00 to 0.08. No copy was listed, so these are reference prices from the item page.
- Talon Knife | Doppler Sapphire, $2,074.00 in Factory New and $2,071.92 in Minimal Wear. A solid deep blue Doppler and the cheapest of the three gems on the Talon. It still costs about $870 more than Doppler Phase 2, the most expensive normal phase. No copy was listed.
| Item | Factory New and Minimal Wear on Nov 16 | Price | |
|---|---|---|---|
| FN $5,008.56, Minimal Wear no price | $3,454.52up to $3,907.04 | Check | |
| FN $3,472.68, MW $3,469.18 | $2,564.33 | Check | |
| FN $2,074.00, MW $2,071.92 | $1,543.04 | Check |
Forest DDPAT and Crimson Web: Camo Talons Over $4,000 in Factory New
Two of the three highest reference prices belong to finishes that are not Dopplers at all. Forest DDPAT and Crimson Web are original finishes with a float range from 0.06 to 0.80. Factory New ends at 0.07, so every Factory New copy has a float between 0.06 and 0.07, and very few copies have a float that low. From Field-Tested to Battle-Scarred the same two finishes cost under $450, so almost all of the Factory New price comes from the float.
Talon Knife | Forest DDPAT
- Wear in the ranking
- Factory New
- Price on Nov 16
- $4,567.00
- From today
- $176.05
A green, brown and black digital camo, with the second highest reference price on SkinsMonkey. The same knife costs $314.69 in Minimal Wear and $270.99 in Battle-Scarred, so Factory New costs over 14 times Minimal Wear. SkinsMonkey had no Factory New copy listed on November 16, 2026, so $4,567.00 is the reference price from the item page, and the next copy can cost more or less. If you like the camo and do not need a record float, Field-Tested cost $276.32 that day and had seven copies listed.
- Talon Knife | Crimson Web, $4,117.28 in Factory New, $681.87 in Minimal Wear and $432.82 in Battle-Scarred. A red blade with a black spider web, from the Horizon Case and the Danger Zone Case. Factory New costs about six times Minimal Wear, and no Factory New copy was listed. Well-Worn cost $445.64, a little more than Field-Tested at $433.70.
- Talon Knife | Ultraviolet, $1,479.56 in Factory New and $477.07 in Minimal Wear, from the Prisma cases. A deep purple finish that looks almost black in shadow. Sixth by reference price, with Factory New at about three times Minimal Wear and no Factory New copy listed.
- Talon Knife | Night Stripe, $1,268.48 in Factory New and $371.67 in Minimal Wear. Dark grey and black stripes. Eighth by reference price, and Battle-Scarred costs $309.26. No Factory New copy was listed.
| Item | Factory New and cheapest wear (Nov 16) | Price | |
|---|---|---|---|
| FN $4,567.00, Battle-Scarred $270.99 | $176.05up to $315.40 | Check | |
| FN $4,117.28, Battle-Scarred $432.82 | $282.50up to $681.07 | Check | |
| FN $1,479.56, Battle-Scarred $327.94 | $224.13up to $476.74 | Check | |
| FN $1,268.48, Battle-Scarred $309.26 | $197.55up to $883.70 | Check | |
| FN $913.41, Battle-Scarred $282.76 | $180.51up to $620.48 | Check | |
| FN $821.99, Well-Worn $294.99 | $193.91up to $600.17 | Check | |
| FN $788.76, Battle-Scarred $267.90 | $189.24up to $518.06 | Check |
Does Wear Matter on Expensive Talons
It depends on the finish. Doppler, Fade, Marble Fade and Tiger Tooth have a float range from 0.00 to 0.08, so they only exist in Factory New and Minimal Wear, and on these finishes the two wears cost within $35 of each other. On the original finishes with a float range from 0.06 to 0.80 it matters a lot, because Factory New is so rare: a Factory New Forest DDPAT costs $4,567.00 and a Minimal Wear one $314.69. Rust Coat is the opposite case. Its float range starts at 0.40, so it exists only in Well-Worn and Battle-Scarred and never reaches the top of the list.
If you want one of the camo finishes because of how it looks, Minimal Wear or Field-Tested gives you a very similar knife for a small part of the Factory New price. Our list of the best Talon Knife skins picks the finishes that look best on this knife in four budgets, and the CS2 wear levels guide explains the float ranges behind each wear.
| Item | Minimal Wear vs Factory New (Nov 16) | Price | |
|---|---|---|---|
| MW $314.69, FN $4,567.00, over 14 times | $176.05up to $315.40 | Check | |
| MW $681.87, FN $4,117.28, about 6 times | $282.50up to $681.07 | Check | |
| MW $371.67, FN $1,268.48, over 3 times | $197.55up to $883.70 | Check | |
| MW $477.07, FN $1,479.56, about 3 times | $224.13up to $476.74 | Check | |
| MW $688.17, FN $1,326.62, pattern matters more | $329.44up to $1,326.45 | Check | |
| MW $571.99, FN $572.57, under $1 apart | $374.18up to $569.69 | Check | |
| MW $3,469.18, FN $3,472.68, $3.50 apart | $2,564.33 | Check | |
| BS $301.55, WW $365.01, no FN or MW | $216.42up to $365.01 | Check |
How to Get an Expensive Talon Knife
Knives drop as the rare special item in cases, and four cases drop the Talon. The Horizon Case of August 2018 and the Danger Zone Case of December 2018 have the original finishes, from Forest DDPAT and Crimson Web to Case Hardened and Fade. The Prisma Case of March 2019 and the Prisma 2 Case of March 2020 have the Chroma finishes, so a Black Pearl, Ruby or Sapphire can only come from a Prisma case. The SkinsMonkey item pages give the chance of one specific Talon finish at 0.005% per case, and a specific gem or phase is less likely still. Opening cases for one of these knives costs far more on average than trading for it. Since October 22, 2025 you can also trade up five Covert skins into a knife from the collection of one of the skins you put in, but you cannot choose the knife, the finish or the phase. Our CS2 trade-up guide explains the rules.
The Steam Community Market is not practical at this price. Valve limits how much a Steam Wallet can hold, and money in the wallet cannot be taken out. Trading is the practical way to get a specific Talon Knife. On SkinsMonkey you log in through Steam, add skins from your inventory, pick the knife and the bot sends the trade offer. You can check the float and the pattern of each copy before you trade, which matters most on a Case Hardened, a Fade or a Crimson Web. Traded CS2 items are under Valve’s Trade Protection for 7 days. If you want to know what your inventory is worth first, our CS2 Inventory Value Checker shows it in about a minute. For the most expensive skins of every knife type, see our list of the most expensive CS2 knife skins.
The top Talon Knife from each price group
Bottom line
Trade for a Case Hardened or a Doppler phase now, or wait for a gem if you want the top price
The most expensive Talon Knife you could trade for on SkinsMonkey on November 16, 2026 was the Case Hardened, at $1,326.62 in Factory New, followed by the four Doppler phases. The Doppler Black Pearl has the highest reference price, $5,008.56, followed by the Forest DDPAT and the Crimson Web, but none of the three had a Factory New copy listed that day.
On Doppler, Fade and Marble Fade the wear changes the price very little, so pick the phase or pattern you like. On the camo finishes Factory New costs several times Minimal Wear, so Minimal Wear or Field-Tested gives you a very similar knife for a small part of the price.
FAQ
What are the most expensive Talon Knife skins in CS2?
On November 16, 2026 the most expensive Talon Knife listed for trade on SkinsMonkey was the Case Hardened, with one Factory New copy at $1,326.62, followed by Doppler Phase 2 at $1,204.44 and Doppler Phase 4 from $1,196.39. The item pages give higher reference prices for the Doppler Black Pearl ($5,008.56), the Forest DDPAT ($4,567.00) and the Crimson Web ($4,117.28) in Factory New, but no copy of those was listed.
Why does a Factory New Forest DDPAT Talon cost so much?
Because almost no copies exist in Factory New. The float range of the Forest DDPAT goes from 0.06 to 0.80, so a Factory New copy needs a float between 0.06 and 0.07. On November 16, 2026 the item page gave $4,567.00 for Factory New and $314.69 for Minimal Wear.
Is there a Talon Knife Emerald or Gamma Doppler?
No. The Talon Knife has the Doppler finish with four phases and three gems, Black Pearl, Ruby and Sapphire, but no Gamma Doppler, so there is no Emerald Talon. Its Doppler copies drop from the Prisma Case and the Prisma 2 Case.
Which Doppler phase is the most expensive on the Talon Knife?
Phase 2, at $1,204.93 in Factory New on November 16, 2026. Phase 4 cost $1,196.73, Phase 3 $1,093.84 and Phase 1 $1,091.78, so all four phases were within $115 of each other. The gems cost much more, from $2,074.00 for the Sapphire.
Which cases drop the Talon Knife?
Four cases. The Horizon Case and the Danger Zone Case drop the original finishes such as Forest DDPAT, Crimson Web, Case Hardened and Fade. The Prisma Case and the Prisma 2 Case drop the Chroma finishes, including every Doppler phase and gem, Marble Fade and Ultraviolet.
Was this article helpful?One tap. It tells us what to update first.
Be the first to rate this article.
Thanks, noted. Alex reads these before every update.
Sources
- SkinsMonkey WIKI: Talon Knife listing and item pages. Prices for every wear, copies listed for trade, float ranges, cases and drop chances, checked on November 16, 2026.
- Valve: Counter-Strike 2 update of October 22, 2025, which lets five Covert items be traded up into a knife or gloves.
- Steam Subscriber Agreement: Steam Wallet funds up to a maximum set by Valve, not exchangeable for cash.
- Counter-Strike Wiki: Talon Knife
- SkinsMonkey on YouTube: Talon Knife skins in CS2, October 2026



